Hey guys,

Looking to clear out the bulk of my electronics gear - with a new job and a smaller apartment I simply don't have the time or space to justify keeping it all around anymore. Here's what I've got:

* Hakko 936 station w/ iron, gently used (bought in college and still using original tip; one replacement tip and some replacement sponges included)
* SparkFun 303D hot-air rework station, very gently used - stripped a few boards and that's about it
* Segger J-Link EDU debugger

Along with a rubbermaid FULL of miscellaneous kit. Adafruit SMD resistor and capacitor books (0605), many many microprocessors (Cortex-M0/M3, PIC24, AVR) and other parts from Digi-Key orders, probably a dozen HD44780 LCDs, breadboards, Chip-Quik solder, assorted solder braids... this is about four years' worth of accumulated hobbyist goodies.

Not sure what to ask for it all - there's probably $400+ in equipment and parts here. Make me an offer? Call/text @ 507 779 6905

I'm interested on the controllers. What are their costs?

I would greatly prefer to sell as much of it in a lot as I can, but if I don't get any bites I'll try to part those out for you.

Had a couple of nibbles but no sure takers thus far - I'd really prefer not to try and dump all of this stuff piecemeal on eBay if I can help it. Let's make a deal!

$30 for the mcus and lcds.