If you are planning on working at a busy time schedule your shop time in Clubhouse before heading off to the shop. Once you’ve scheduled that time, stick to it or cancel it. If the area you’re in is below its occupancy limit at the end of your time slot you can continue to work, but be prepared to leave if the area fills up with other scheduled members.
Walk-ins are acceptable though Reservations take precedence.
Try to keep at least 6ft from people in the shop who you are not there with. Be mindful of shop limits and do not overcrowd any area. If you have not reserved time in an area don’t remain in it if your presence would make physically distancing impossible.
If you have any questions or concerns about safety in the shop, or if you witness any member not complying with the posted regulations please report it at go.tcmaker.org/incidentreport or email us at [email protected]
Wash your hands, folks! That should go without saying now. Also remember to wipe down surfaces that you’ve been touching. We have sanitizer stations around the shop with both hand and surface sanitizing sprays. Check on machines for any specific instructions for cleaning.
If you’re feeling even a little bit off, please, don’t come into the shop.
Please report if you test positive for COVID so we can keep our community informed. You can also download the new app COVIDaware MN to get notified if you have been near someone who tests positive for COVID-19 https://covidawaremn.com/.
Members with a scheduled appointment have priority on the laser cutter during that time. If no one has time booked, the laser is available for walk-up use.